English
Views: 1 Author: Site Editor Publish Time: 2026-06-08 Origin: Site
copper pipe, the common diameter we can supply isΦ7（1/4”/6.35）
Φ7.94(5/16”), Φ9.52(3/8”). galvanized plate, aluminum fins etc.
Our main fin mold including:
1) Φ9.52, 4Rx16T Pitch: 25mm, line spacing 21.65mm, cross arranged
2) Φ9.52, hole spacing: 25mm, line spacing 21.65mm, copper fins
3) Φ7, hole pitch: 21, line spacing 12.7mm, hydrophilic aluminum foil, cross arrangement, isosceles triangle
4) Φ12 (1/2"), pitch: 35mm, line spacing 35mm, square arrangement
5) Φ7.94 (5/16"), pitch: 25mm, line spacing 21.65mm, cross arrangement, equilateral triangle
6) Φ9.52 (3/8"), pitch: 25mm, line spacing 21.65mm, cross arrangement, equilateral triangle
7) Φ15.88 (5/8”), pitch: 50mm, line spacing 50mm, square arrangement
8) Φ12.7 (1/2"), pitch: 31.75mm, line spacing 27.5mm, cross arranged.
How to make a copper condenser
Sometimes we use fully automatic machine, and sometimes we do it by manual.
According to aperture, hole distance, number of holes, line spacing, chip spacing, number of rows, and number of fins,
Manually adjust the mold, cut the knife, and punch the rolled aluminum foil into the fins on the machine.