Bundy Tube Refrigerator Wire Tube Condenser
Product Description
Let's take a look at how it is produced:
Dressing and cutting of raw materials. Coils of Bundy pipe are threaded straight through a machine and then bent. The coils of wire are straightened by the machine and cut exactly to the required length.
Wire tube condenser forming. Steel coils and bent Bundy tubes are placed on top of the fixed mold and placed into the machine for wire welding.
Bend the shaped silk pipe, fold it into layers, and then fix it, install the bracket, and fix the air hood.
Welding copper pipe, water inspection, transfer on electrophoresis for cleaning, baking, painting.
Repair the place where the paint is not sprayed, install the rubber sleeve, and inflate the air to keep the pressure.
Packing. Carton+wooden pallet.
We can supply many kinds of CO2 condenser ,CO2 wire tube Condenser ,Refrigeration Parts , Fridge wire condenser ,Fridge Wire Tube Condenser , Fridge Condenser parts , Refrigeration Parts ,Wire Tube Fridge Condenser,Fridge Condenser , Refrigeration Wire Tube Condenser , Refrigeration Condenser ,Wire Tube Condenser ,Refrigeration Wire Tube Condenser ,tube condenser, Fridge Condenser, Fridge Wire Tube Condenser ,Fridge
PRODUCT DETAILS
This is our Commonly condenser, it is universal type in Bangladesh,pakistan,DubaiSri Lanka etc market.
and the Main Meaterial as follows:
1:Diameter of Bundy tube: 4.76,6,6.35,8,9.52mm
2: Low carbo steel wire: 1.0-1.6
3: Bracket:steel plate(SPCC),thickness 0.6-1.5
4: Steel Plate:SPCC thickness 0.3-0.4
PRODUCT NAME: | Bundy tube refrigerator Wire Tube Condenser |
APPLICATION: | REFRIGERATOR,FREEZER,SHOWCASE,WATER COOLER |
REFRIGENT: | R134a |
MAIN MATERIAL:
| 1,BUNDY TUBE:Ø4.76/6/6.35/8/9.52,WALL THICKNESS 0.7MM. 2,LOW CARBON STEEL WIRE Ø1.0-1.6MM. 3,BRACKET:STEEL PLATE(SPCC),THICKNESS 0.6-1.5MM. 4,STEEL PLATE:SPCC THICKNESS 0.3-0.4MM
|
STRUCTURE: | 1,FLAT TYPE OF WIRE ON TUBE CONDENSER USED AT THE BACK. 2,BENDED OR SPIRAL TYPE OF WIRE ON TUBE CONDENSER USED AT THE BOTTOM. 3,WRAPPED TYPE OF TUBE EMBED ON PLATE.
|
MAIN PRODUCTION PROCESS: | TUBE BENDING->WELDING->FIX THE BRACKET->WELD THE SUCTION TUBE->LEAKAGE TEST->COATING->FOLDING OR BENDING SHAPING->INSPECTION->PAKAGE.
|
PERFORMANCE:
| 1,SUEFACE WITH ELECTROPHORESIS COATING TO PREVENT THE CORROSION. 2,INNER CLEANESS CAN MEET THE REQUIREMENT OF CFC & R134A COOLING SYSTEM 3,CAB SATIFY DIFFERENT COOLING CAPABILITY REQUIREMENTS.
|