Water Dispenser Parts Steel Wire Tube Condenser
Product Description
Let's introduce one of our main product: Wire Tube Condenser.
I believe that when you go to the market or have a meal in a restaurant, you will notice that there is a black object on the back of the freezer, it is composed of many "U" type wires.This is our wire tube condenser, which is an important member of refrigerator.
Steel wire coil condenser is also known as wire tube condenser. Its snake coil is welded by coil welding of thin steel plate coated with copper. Steel wire with a diameter of 1.5~2mm is uniformly welded on both sides of the coil to dissipate heat, as shown in the following figure.
This condenser has the advantages of small volume, light weight, good heat dissipation effect and easy to do mechanized production. The following is the production process of wire tube condenser.
We can supply many kinds of CO2 condenser ,CO2 wire tube Condenser ,Refrigeration Parts , Fridge wire condenser ,Fridge Wire Tube Condenser , Fridge Condenser parts , Refrigeration Parts ,Wire Tube Fridge Condenser,Fridge Condenser , Refrigeration Wire Tube Condenser , Refrigeration Condenser ,Wire Tube Condenser ,Refrigeration Wire Tube Condenser ,tube condenser, Fridge Condenser, Fridge Wire Tube Condenser ,Fridge
PRODUCT DETAILS
This is our Commonly condenser, it is universal type in Bangladesh,pakistan,DubaiSri Lanka etc market.
and the Main Meaterial as follows:
1:Diameter of Bundy tube: 4.76,6,6.35,8,9.52mm
2: Low carbo steel wire: 1.0-1.6
3: Bracket:steel plate(SPCC),thickness 0.6-1.5
4: Steel Plate:SPCC thickness 0.3-0.4
PRODUCT NAME: | water dispenser parts steel wire tube condenser |
APPLICATION: | REFRIGERATOR,FREEZER,SHOWCASE,WATER COOLER |
REFRIGENT: | R134a |
MAIN MATERIAL:
| 1,BUNDY TUBE:Ø4.76/6/6.35/8/9.52,WALL THICKNESS 0.7MM. 2,LOW CARBON STEEL WIRE Ø1.0-1.6MM. 3,BRACKET:STEEL PLATE(SPCC),THICKNESS 0.6-1.5MM. 4,STEEL PLATE:SPCC THICKNESS 0.3-0.4MM
|
STRUCTURE: | 1,FLAT TYPE OF WIRE ON TUBE CONDENSER USED AT THE BACK. 2,BENDED OR SPIRAL TYPE OF WIRE ON TUBE CONDENSER USED AT THE BOTTOM. 3,WRAPPED TYPE OF TUBE EMBED ON PLATE.
|
MAIN PRODUCTION PROCESS: | TUBE BENDING->WELDING->FIX THE BRACKET->WELD THE SUCTION TUBE->LEAKAGE TEST->COATING->FOLDING OR BENDING SHAPING->INSPECTION->PAKAGE.
|
PERFORMANCE:
| 1,SUEFACE WITH ELECTROPHORESIS COATING TO PREVENT THE CORROSION. 2,INNER CLEANESS CAN MEET THE REQUIREMENT OF CFC & R134A COOLING SYSTEM 3,CAB SATIFY DIFFERENT COOLING CAPABILITY REQUIREMENTS.
|