E-mail: tommy@retekool.com |  TEL: 0086-531-58661433/58661443
You are here: Home » Products » Drier& Accumulator&Check Valve » Common Type Drier » RETEKOOL Brand Molecular Sieve Liquid Line Filter Drier Use for HVAC System

PRODUCT LIST

RETEKOOL brand Molecular Sieve Liquid Line Filter Drier use for HVAC system
RETEKOOL brand Molecular Sieve Liquid Line Filter Drier use for HVAC system RETEKOOL brand Molecular Sieve Liquid Line Filter Drier use for HVAC system

loading

RETEKOOL Brand Molecular Sieve Liquid Line Filter Drier Use for HVAC System

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button
Molecular Sieve Llquid Line Filter Drier
Molecular sieve liquid line filter drier, usinghigh quality compressed sphericaldesiccant, and compressed throughautomatic integration with high -density filters in thecylinder body, to achieve the role of dryingfilter that can effectively filtersystem of residual water copies anddebris.
  • RTK-083

  • RETEKOOL

Availability:
Quantity:

The introduction of Molecular Sieve Llquid Line Filter Drier


Molecular sieve liquid line filter drier, usinghigh quality compressed sphericaldesiccant, and compressed through automatic integration with high -density filters in thecylinder body, to achieve the role of dryingfilter that can effectively filtersystem of residual water copies anddebris.


The liquid accumulator separator is a critical component in air conditioning systems, designed to store excess refrigerant and separate liquid from vapor before it reaches the compressor. Located between the evaporator and compressor, it prevents liquid slugging—a major cause of compressor damage.

RETEKOOL Brand Molecular Sieve Liquid Line Filter Drier Use for HVAC System


The features of Molecular Sieve Llquid Line Filter Drier

(1)Adaptive to CFCHCFC/HFC

(2)A variety of shape design, the same volume of different aspect ratio cases, user-friendlyselection and installation

(3)In order to facilitate welding, ODF adoption of TP2 copper reserve

(4)Corrosion resistant epoxy powder paint finish, salt spray test above 500 hours


Additives without consuming oil

Joint type:ODF or SAE

Corrosive resistance molded

For a variety of refrigerant R12,R134A,R22,R404A,R407C,R410A,R500,R502,R507

Maximum working pressure:4.70Mpa/680Psig


Previous: 
Next: 
Contact Us
TEL:0086-531-58661433/58661443
PHONE:0086-13964095918
Copyright © 2025 JINAN RETEK INDUSTRIES INC(JINAN BESTAR INC) All rights reserved.
Designed by Leadong  / SiteMap